✓
Warehouse and plant floor cleaning
Ride-on and walk-behind scrubbing for large concrete areas, with routes planned around racking, aisles, and traffic so the work happens without blocking operations.
Industrial cleaning · Bloomington, Minnesota
Industrial Cleaning Services Bloomington MN
Cleaning for working facilities: degreasing, high-bay dust control, dock and warehouse floors, scheduled around production and your safety rules.
Warehouse and plant floors
Degreasing and dust control
Safety-led scheduling
Industrial facilities are not large offices
Cleaning a working facility is a different discipline from cleaning a workplace. The soil is heavier, much of it is oil-based, the equipment is bigger, and the site has safety rules that govern where a cleaner can walk and when.
Bloomington Cleaning provides industrial cleaning for warehouses, distribution space, light manufacturing, and the shop and dock areas of mixed-use buildings around Bloomington.
Two things drive the work: the scope has to match the actual soil, and the schedule has to respect production. A crew that shuts down a line to mop a floor has cost more than it delivered.
The office and break areas inside an industrial building are usually cleaned to a normal standard alongside the plant floor. That side is ordinary janitorial work, and we scope it in the same agreement.
Scope of work
Industrial cleaning services we provide
✓
Degreasing and oil removal
Oil and hydraulic residue near equipment, in maintenance bays, and on dock aprons, using degreasers matched to the surface and to your drainage rules.
✓
High-bay and overhead dusting
Structural steel, rafters, conduit runs, light fixtures, and ductwork, reached with lifts. Overhead dust is both a housekeeping and a combustible-dust concern in the wrong facility.
✓
Dock and loading area cleaning
Dock floors, levelers, and approaches, where tracked-in soil, salt, and spilled product accumulate faster than anywhere else in the building.
✓
Restrooms, breakrooms, and locker rooms
Cleaned to full office standard, because these are the areas your staff judge the facility by and they carry the highest complaint rate.
✓
Machinery exteriors, by agreement
Exterior surfaces and guarding cleaned to an agreed line. We do not touch equipment internals, and the boundary is written into the scope with your maintenance team.
Safety and access
Request a Callback
Working inside your safety program
On an industrial site, safety determines what cleaning is possible. This is the part that separates a contractor who can work in a plant from one who cannot.
How we operate on a working site:
- PPE to your site requirement, including hi-vis, safety footwear, eye protection, and hearing protection
- Site induction and sign-in for every crew member, and escorted access where you require it
- Lockout/tagout respected absolutely: nothing is cleaned on or near equipment that is not verified de-energized
- Forklift and traffic awareness, with cleaning routes agreed so crews are never in a blind aisle
- Wet-floor control and drying plans, since a wet concrete floor in a forklift aisle is a serious hazard
- SDS documentation for every chemical we bring on site, filed with you in advance
We work to your program rather than asking you to accommodate ours. If your site requires a specific induction, a permit for elevated work, or a particular contractor management system, tell us during the walkthrough and it goes into the scope.
Confined spaces, hazardous waste handling, and work requiring specialist certification sit outside what we do. We will say so plainly rather than taking it on.
Matching the soil
Request a Callback
Scoping by soil type, not by square footage
- Oil and grease: degreasing with adequate dwell time and mechanical agitation, near equipment, bays, and dock aprons.
- Particulate and dry dust: captured with industrial vacuums rather than swept, since sweeping puts it back into the air.
- Tracked-in salt and grit: the dominant winter problem in Minnesota, handled with entry strategy and neutralizing cleaners.
- Product residue: handled to your specification, because what is appropriate depends entirely on what you make or store.
Square footage is close to meaningless as a pricing basis here. A clean, racked warehouse and a machining area of identical size need entirely different labor, chemistry, and equipment, which is why industrial cleaning has to be quoted from a site visit.
Facility types
Request a Callback
Facilities we clean around Bloomington
Bloomington and the surrounding southwest metro carry a mix of distribution, light manufacturing, and service facilities, much of it in multi-tenant industrial parks.
Where we typically work:
- Warehouses and distribution centers: floors, racking aisles, and dock areas at scale
- Light manufacturing and assembly: floors and equipment exteriors around active production
- Maintenance and service shops: heavy degreasing and bay floors
- Multi-tenant industrial suites: shop and warehouse areas alongside the office side
- Cold storage and food-adjacent space: to your sanitation standard, coordinated with your own program
Facilities handling food or regulated product usually run their own sanitation program internally. In those cases we cover the general housekeeping around it rather than the regulated process areas, and the boundary is written down.
Where floors need restorative machine work beyond routine scrubbing, that is floor care, scheduled separately.
Site visit with your operations contact
We walk the facility with someone who knows the operation, identifying soil types, surfaces, access constraints, active equipment, and the areas that are out of bounds.
Safety requirements and documentation
We confirm PPE, induction, permits, and contractor management requirements, and provide SDS and insurance documentation for your files before any work begins.
Written scope with production windows
The scope names each area, its tasks and frequency, and the window when the work can happen, so cleaning is planned around your shifts rather than colliding with them.
Service start with a supervised first run
A supervisor attends the first service so crews learn the site and the routes properly, and we adjust the plan where reality differs from the walkthrough.
Clear pricing factors
Request a Callback
How Much Does Industrial Cleaning Cost in Bloomington, MN?
Industrial cleaning is normally quoted per service or per hour rather than per square foot. Recurring warehouse floor scrubbing in Bloomington commonly runs about $0.04 to $0.12 per square foot per service, crewed labor for degreasing and detail work typically $55 to $95 per hour per technician, and high-bay overhead dusting is usually a project quote from $1,200 depending on height, access, and lift requirements.
Soil type, equipment access, and your production schedule move the price more than area does. Work that must happen in a narrow overnight window, or that needs lifts and elevated-work permits, costs more than the same task with open access. We quote from a site visit, and we will tell you when a lower frequency would serve you just as well.
Questions answered
Industrial cleaning questions Bloomington facilities ask
Can you clean while production is running? +−
Partly, and that is usually the right approach. Floor work in non-production aisles, break areas, restrooms, and offices can proceed during shifts. Anything on or near equipment needs that equipment verified de-energized, so it goes into a shutdown window or a weekend. We build the scope around which tasks belong in which window.
Do your crews carry the right PPE and training? +−
Yes, and we work to your site's requirement rather than a generic standard. Crews arrive with hi-vis, safety footwear, and eye and hearing protection, and complete your site induction before starting. If your facility requires a specific contractor management system or elevated-work permit, tell us at the walkthrough.
How do you handle lockout/tagout? +−
We do not clean on or adjacent to equipment unless it is verified de-energized and tagged by your authorized personnel, and our crews never apply or remove locks themselves. That boundary is written into the scope. If a task cannot be done safely within it, we schedule it for a shutdown instead of finding a way around.
Why can't you quote from square footage alone? +−
Because soil type dominates the labor. Scrubbing a clean racked warehouse floor and degreasing a machining area of the same size are different jobs by a factor of several. Access matters too: a floor with clear aisles cleans far faster than one where a crew works around parked equipment. A site visit is the only way to quote this accurately.
Do you handle hazardous waste or confined spaces? +−
No. Hazardous waste handling, confined-space entry, and work requiring specialist certification sit outside our scope, and we would rather say that clearly than take on work we are not the right contractor for. We can clean up to the boundary of that work and coordinate around a specialist you engage.
Can you cover both the plant floor and the offices? +−
Yes, and most of our industrial accounts are set up that way. The office, restroom, and breakroom side is scoped as ordinary janitorial work at office standard, and the plant side is scoped separately by soil type and access. One agreement, two standards, priced so you can see each part.
Get an industrial cleaning scope built from a site visit
Tell us what your facility does and where housekeeping is falling behind. We will walk the site with your operations contact, work inside your safety requirements, and scope the work around your production schedule.
Request a quote
Tell us about your home or building
Send the details and we will reply with a clear scope and price. No obligation.