✓
Rough clean, during construction
Debris removal, sweeping, and gross dust knockdown once the heavy trades are finished but before finish work begins. This keeps dust out of newly installed finishes rather than cleaning it off them later.
Post-construction · Bloomington, Minnesota
Post-Construction Cleaning Bloomington MN
Construction cleanup in phases: drywall dust removal, adhesive and label removal, and final detail that gets a finished space ready for handover.
Rough and final phases
Drywall dust removal
Handover-ready detail
Construction dust is a different problem
Drywall dust behaves nothing like household dust. It is fine enough to stay airborne for hours, it settles into every horizontal surface and gap, and wiping it with a damp cloth turns it into a paste that smears rather than lifts.
It also returns. A space cleaned once after construction will look dusty again within a day, because dust trapped in ceiling voids, vents, and light fixtures keeps working its way down. Cleaning in phases is what solves that, rather than cleaning harder.
Bloomington Cleaning handles post-construction cleanup for renovations, tenant improvements, and new builds: residential remodels, commercial fit-outs, and whole-space projects.
Contractors and property managers are the usual clients, though homeowners finishing a kitchen or basement renovation need the same thing on a smaller scale.
The three phases
How post-construction cleaning is staged
✓
Final clean, after finish work
The main event. Every surface is cleaned in sequence from ceiling to floor: fixtures, vents, cabinet interiors, glass, and hard floors, with detail work on adhesive residue and labels.
✓
Touch-up clean, before handover
A final pass a day or two after the final clean, once settled dust has appeared and the last trades have been through. This is what makes a walkthrough go smoothly.
✓
Adhesive, label, and sticker removal
New fixtures, windows, and appliances arrive covered in labels and adhesive. Removing these without scratching glass or damaging finishes is slow, careful work and it is what separates a finished space from a nearly finished one.
✓
Paint and compound spot removal
Drywall compound splatter, paint overspray, and caulk residue on floors, glass, and fixtures, removed with methods matched to each surface so nothing gets marred.
✓
Vent, fixture, and cabinet interiors
HVAC vent covers, light fixtures, and the insides of every cabinet and drawer, all of which collect dust that otherwise redistributes for weeks after occupancy.
Why phasing matters
Request a Callback
Why one clean after construction is never enough
The common mistake is booking a single clean on the last day of work and expecting the space to be ready. It will look good that afternoon and disappointing the next morning.
What actually happens:
- Dust settles out of the air for 24 to 72 hours after work stops
- Ceiling voids, vents, and light fixtures release dust gradually once air handling runs
- Final trades doing punch-list work create fresh dust and debris after the clean
- Foot traffic during move-in disturbs dust the first clean could not reach
A final clean followed by a touch-up pass costs less than two full cleans and produces a genuinely better result, because the second pass is short and targeted rather than a full repeat.
Running air handling with filtration for a day between the two passes helps considerably. If the schedule allows it, we will recommend it.
Scheduling with trades
Request a Callback
Where cleaning fits in the construction schedule
- After the heavy trades, before finish work: the rough clean, so drywall and framing dust does not embed itself in new flooring and cabinetry.
- After finish work, before punch list: the final clean, once painting, flooring, and fixtures are installed and the space is essentially complete.
- After punch list, before handover: the touch-up clean, covering settled dust and anything the last corrections disturbed.
- Floor finishing last: any strip, seal, or polish work goes after cleaning, never before, or it seals dust into the finish.
The schedule slipping is normal and we plan for it. Tell us the realistic date rather than the optimistic one: a crew arriving to clean a space where trades are still working wastes your money and produces a worse result, since we cannot finish behind active work.
Project types
Request a Callback
Projects we clean in Bloomington
Scope varies enormously by project type, and so does the dust burden:
- Residential renovations: kitchens, bathrooms, and basement finishes, where the rest of the home is occupied and containment matters
- Whole-home remodels and new builds: full multi-phase cleaning with the space empty
- Commercial tenant improvements: office fit-outs on a lease deadline where handover timing is fixed
- Retail build-outs: sales floor presentation plus back-of-house, usually against an opening date
- Medical and dental fit-outs: the same dust problem with stricter final standards before equipment arrives
For occupied-home renovations, the dust that escapes the work area is often the bigger complaint. We can include adjacent living areas in the scope so the whole house recovers rather than just the room that was renovated.
New flooring after a renovation usually needs its own attention before occupancy. That is floor care, scheduled after the cleaning.
Site visit or project detail review
We need square footage, the project's scope and stage, and the handover date. A site visit is best, because the dust burden of a full gut differs enormously from a cosmetic refresh at identical size.
A phased scope and schedule
You get a written scope by phase, with each phase priced separately and slotted against your construction calendar so it fits between the right trades.
Cleaning in sequence, top to bottom
Ceilings, vents, and fixtures first, then walls and surfaces, then cabinet interiors and glass, then floors last. Working out of order means recleaning finished surfaces.
Walkthrough and touch-up
We walk the space with you or your contractor. Anything flagged is handled in the touch-up pass, so the handover walkthrough is not the first time problems surface.
Clear pricing factors
Request a Callback
How Much Does Post-Construction Cleaning Cost in Bloomington?
Post-construction cleaning in Bloomington typically runs about $0.30 to $0.90 per square foot for a final clean, with heavy or detailed projects going higher. A residential renovation clean commonly lands between $400 and $1,200, and commercial fit-outs are usually quoted per square foot. A rough clean during construction and a touch-up before handover are each priced separately, generally at a fraction of the final clean.
Dust burden and detail level drive the price. A gut renovation with drywall throughout takes several times the labor of a cosmetic refresh at the same size. Label and adhesive removal on many new windows and fixtures adds meaningful hours, as does a project where trades will still be working around us. We quote from the actual site and stage.
Questions answered
Post-construction cleaning questions contractors ask
When should we schedule the final clean? +−
After all finish work is complete and before the punch-list walkthrough, with a touch-up pass a day or two later. Booking the final clean while trades are still working is the most common scheduling mistake: we cannot clean behind active work, so you end up paying for a clean that gets undone the same day.
Do you remove construction debris? +−
We remove the residual debris a clean produces: packaging, offcuts, swept material, and anything left in cabinets or on surfaces. Bulk debris removal such as demolition material, large offcuts, and dumpster loads is the contractor's, though we will tell you clearly what falls on each side before we start.
Why is drywall dust so difficult to remove? +−
It is extremely fine, so it stays airborne for hours and settles into every gap, and it turns to paste when wetted, which smears rather than lifts. It has to be captured dry first with HEPA vacuuming and dry methods, then cleaned wet afterward. Attacking it with a damp cloth first is what leaves the streaks people associate with construction cleanup.
Can you clean while our trades are still working? +−
For a rough clean, yes, and that is the point of the phase. For the final clean, no: it needs the space clear to be worth doing. If your schedule genuinely cannot separate them, we would rather adjust the phasing with you than deliver a final clean that is compromised from the start.
Do you handle occupied homes during renovation? +−
Yes, and the dust that escapes the work area is usually the real issue. We can include adjacent rooms and shared spaces in the scope, and clean at a frequency that keeps the rest of the home livable while the project runs rather than waiting until the end.
Is floor sealing or waxing included? +−
No, that is separate work and it belongs after the cleaning, never before. Sealing or finishing a floor that still holds construction dust locks the dust into the finish permanently. We schedule floor work as its own phase once the final clean is done.
Get construction cleanup scheduled around your trades
Tell us the project, its square footage, and your realistic handover date. We will scope the phases, price each one, and slot them into your construction calendar so cleaning does not become the thing that delays the handover.
Request a quote
Tell us about your home or building
Send the details and we will reply with a clear scope and price. No obligation.